This crossover pad protects cables and hoses from impact damage by light vehicles and pedestrians.
The pad is available in 1200mm lengths, 600mm wide and only 50mm high to reduce the trip hazards. With the capabilities of joining lengths together to meet your needs.
End caps to suit: NPR00713-00 (Male), NPR00714-00 (Female).
+ THIS PRODUCT IS DESIGNED AS A LOAD SUPPORT BLOCK
+ AS A GUIDE, THIS BLOCK IS RATED TO WITHSTAND AN EVENLY DISTRIBUTED STATIC LOAD OF 30KG PER 1CM X 1 CM WITH MINIMUM LOAD AREA OF 100 SQUARE CENTIMETRES
+ ONLY USE ON A FLAT, EVEN, SOLID SURFACE
+ ALWAYS PERFORM YOUR OWN RISK ASSESSMENT BEFORE USING THIS PRODUCT IN ANY CONFIGURATION
+ ALWAYS FOLLOW YOUR MACHINERY MANUAL GUIDELINES
+ END FACES ARE NOT LOAD BEARING
+ TESTED TO AS1170.0 AND ASTM D1621 – 10
THIS PRODUCT IS DESIGNED AS A LOAD SUPPORT PAD
AS A GUIDE, THIS PAD IS RATED TO WITHSTAND A CENTRALLY POSTIONED EVENLY DISTRIBUTED STATIC LOAD OF 30KG PER 1CM X 1CM WITH A MINIMUM LOAD AREA OF 200 SQUARE CENTIMETRES
ONLY USE ON A FLAT, EVEN, SOLID SURFACE
ALWAYS PERFORM YOUR RISK ASSESSMENT BEFORE USING THIS PRODUCT
